Hi guys,
my stuff:
LD 9.0 sp3, three core servers, Go-Daddy certificate, configured with Non-TLS. -> result: 1200 devices configured. (still waiting a large bunch of devices to be configured vPro). All devices configured are Lenovo, AMT versions 4,5,6,7,8.
The only but is for remote control via Intel KVM, when a device is provisioned, ports 16992 and 16994 are open (Non-TLS), if you try KVM it doesn't work.., so, we have to go in Landesk management Console-> Intel vPro options -> Intel vPro Status,.., then after a few seconds and when Intel vPro Status is showed, we see that port 5900 is open in this device, then remote control via Intel KVM works. Well, a this point we don't care to do Intel vPro Status to open 5900 port and get Remote control KVM.
Are you experienced this issue with remote control KVM, I meant if you have to open 5900 port to get remote control KVM?
Well, I see that we have the same problems:
- laptops with two network interfaces, wired an wireless -> provisoning process fail if ip address in the provisioning is the wireless ip..
- ip static in operating system, no way, nothing with them. Last thing is make a manual reservation (mac-ip-name-computer) in our dhcp system, we are going to see what happen when this devices will be rebooted..
In the next months we are planning change to LANDesk 9.5,
have you got some advice about vPro provisioning?
what will happen with devices already provisioned?
We hope LD9.5 and Intel vPro they should improve together.
Regards.